Stained Cedar Shake Siding Flaking

Reach the high areas or apply cleaner to the less dirty areas using a roller with an extension pole which doesn t allow you to apply as much pressure or elbow grease as a paint brush.

Stained cedar shake siding flaking.

Work with the natural grain of the siding. When the peeling stain is scraped off dead wood fiber often stays stuck to the back of the flake. Staining these dirty wet shingles on site costs more and results in an inferior finish every time. Coating the cedar shingles with a water resistant product helps to preserve the wood against moisture damage.

You don t have to do much to cedar shingle siding if you prefer its weathered gray look other than clean and coat it with a clear water resistant preservative and inspect it for rot and damage periodically. Step 4 let the cleaner sit on the cedar siding for 15 to 30 minutes. Brush on a coat of stain using a staining brush. Most western red cedar shingles are still stained by hand on site.

After you have washed it wait for it to dry before applying any stain to the cedar. Prepare your cedar siding by washing it with soapy water to remove any dirt or dust if any has accumulated. First remove any mill glaze a hard shiny surface on one side of the siding by sanding. Use a thick brush or backbrush to apply evenly.

One of the most thorough methods when staining is to use a thick natural bristle brush. Stains dry rapidly and fresh stain applied over dried stain will show lap marks. Paint vs stain best stains seals and protects wood shingles leaving no paint mil to chip crack or peel. 2 use wood cleaner.

If possible stain all sides of the siding before installation. Use a thick brush when staining. Another insidious cause of solid stain failure on cedar has to do with dead wood fiber on the face of the siding. Oil or water based stains make an ideal stain for your cedar shingles as long as they don t have a high solid particulate nature.

Apply the wood cleaner to the cedar siding using a paint brush or roller. This is a shame when on site staining results in premature coating failure. Pressure washing your cedar siding is perfectly ok as long as the sprayer washer is set at low pressure. The fastest and most thorough method to apply stain to cedar siding is with a thick natural bristle brush.

Staining cedar siding differs from application of paint and other finishes. 6 easy steps to repaint over stained cedar siding 1 rinse. These have more bristles than a regular paintbrush ensuring more even coverage. This is a telling sign of the problem.

The brush bristles distribute the stain evenly into the wood grain reaching into the small undulations on the surface of the cedar planking.