Thicken A Sheet Metal Part Solidworks

Use rip feature to create thin cuts.

Thicken a sheet metal part solidworks.

If you are cutting a multibody part set the feature scope options. Import parts into solidworks then use the rip feature to create thin cuts in sheet metal geometry between adjacent flanges. You might also like. The following example shows the thicken both sides option.

Since you want to end up with sheet metal parts having a constant thickness you might want to delete all the faces except one side of the part turning your solid model into a surface model and then thicken the surface model. In solidworks 2020 you can thicken a surface by specifying a direction other than normal to a face with thicken and thicken cut features. Select a face as the fixed face for the sheet metal part. If your design can tolerate these variances this is certainly a good reason to use sheetmetal for parts that are not simply cubical.

He started in r d working on many of the new functionalities developed at the time edrawings sheet metal weldments etc. In the graphics area select a surface to thicken. Import other file types into solidworks. Examine the preview and select the side of the surface you want to thicken.

In the last few years he moved to ts. However in some circumstances when the design requires certain types of geometry you can use non sheet metal feature tools then insert bends or convert the part to sheet metal. The overall size is a little off from the sketch and this is due to the difference in thicknesses. The real power of solidworks comes when you have to design bent sheet metal a task which looks simple but really isn t.

Before any bending you have to cut the sheet metal. Set the sheet thickness and default bend radius. That means you need a contour of the sheet metal to be cut known as a flat pattern. Select keep body if you want to keep the solid body to use in another convert to sheet metal feature.

The model isn t perfect aka the relief cuts but i think is closer to what you are looking for. He began his career with solidworks over 15 years ago. I still find many operations in sheetmetal limiting but this is one thing that does provide significant freedom. Under sheet metal parameters.

When you create a sheet metal part you have one sheet metal feature part thickness and as many sheet metal. Insert bends to convert the model to a sheet metal part to flatten and further edit the part. The direction for thicken or thicken cut can be a linear sketch entity two vertices or sketch points cylindrical or conical faces reference planes or axes and so on. There are specific sheet metal features you can use to create sheet metal bodies quickly.

Under thicken parameters do the following. After the shell command you had a wall thickness of 0 80 yet the sheet metal was using 0 60.